This tapping fitting is a consumable part with a completed blocking tee, which is used to weld on pipelines for branch connection. Its lower end arc is the diameter size of the pipeline, and there is a bypass interface at the neck to connect the bypass pipeline. The inner and size can be determined according to customer requirements.
Key Features
This tapping fitting is a consumable part with a completed blocking tee, which is used to weld on pipelines for branch connection. Its lower end arc is the diameter size of the pipeline, and there is a bypass interface at the neck to connect the bypass pipeline.
The inner and size can be determined according to customer requirements.
parameters
|
Applicable Media |
Oil, natural gas, water, coal gas, light oil, aviation fuel, and other non-corrosive media |
|
Suitable Diameter |
DN80-DN700 |
|
Pipeline Medium Temperature |
-20-80°C |
|
Pipeline Medium Pressure |
≤ 6.4 MPa |
Applicable Media
Oil, natural gas, water, coal gas, light oil, aviation fuel, and other non-corrosive media