PCM150 Pipe Cutting Machine
Applied to cutting pipes on steel pipes, turn the handle to the appropriate diameter, open the pipe cutting machine from the bottom loading and unloading hook, and then vertically mount it on the pipe. The four contact points of the two elastic positioning claws should be evenly in contact directly above the pipe. Tighten the handle so that all four blades are in contact with the pipe. The cutting method is to swing the pipe cutting machine back and forth 90 to 110 degrees, and then tighten the handle to cut the pipe.
Key Features
The four contact points of the two elastic positioning claws should be evenly in contact directly above the pipe. Tighten the handle so that all four blades are in contact with the pipe.
The cutting method is to swing the pipe cutting machine back and forth 90 to 110 degrees, and then tighten the handle to cut the pipe.
parameters
|
Suitable Diameter |
φ159mm-φ240mm |
Applicable Media
Custom applications can be designed upon request
Taitat Changlin Pipeline Technology (Jiangxi) Co., Ltd.